Function

a!barChartField_21r4( label, instructions, categories, series, xAxisTitle, yAxisTitle, yAxisMin, yAxisMax, stacking, referenceLines, showLegend, showDataLabels, showTooltips, allowDecimalAxisLabels, labelPosition, helpTooltip, accessibilityText, showWhen, colorScheme, height, xAxisStyle, yAxisStyle, data, config, refreshAlways, refreshAfter, refreshInterval, refreshOnReferencedVarChange, refreshOnVarChange )

Displays numerical data as horizontal bars. Use a bar chart to display several values at the same point in time.

See also:

• Line Chart
• Column Chart
• Pie Chart
• Area Chart
• Scatter Chart
• Chart Series
• Charts design guidance
• Chart Color Schemes
• Configure Charts Using Records

Parameters

Name	Keyword	Types	Description
Label	label	Text	Text to display as the field label.
Instructions	instructions	Text	Supplemental text about this field.
Categories	categories	Text Array	Text to display on the x-axis next to each bar.
Series	series	Chart Series Array	Array of data series created with a!chartSeries().
X-Axis Title	xAxisTitle	Text	Title for the independent (vertical) axis.
Y-Axis Title	yAxisTitle	Text	Title for the dependent (horizontal) axis.
Min Y-Axis	yAxisMin	Number (Decimal)	Determines the minimum displayed point on the horizontal axis.
Max Y-Axis	yAxisMax	Number (Decimal)	Determines the maximum displayed point on the horizontal axis.
Stacking	stacking	Text	Determines if series values display as separate bars, stacked within one bar to show the sum of series values, or stacked to a height of 100% to show the contribution to the whole within each category. Valid values: "NONE" (default), "NORMAL", "PERCENT_TO_TOTAL".
Reference Lines	referenceLines	Chart Reference Lines Array	Array of reference line values for each threshold to be defined on the chart. Configured using a!chartReferenceLine().
Show legend	showLegend	Boolean	Determines if a color legend displays below the chart. Default: true.
Show data labels	showDataLabels	Boolean	Determines if data values are displayed next to each bar. Default: false.
Show tooltips	showTooltips	Boolean	Determines if a tooltip displays the data value for a bar. Default: true.
Allow decimal axis labels	allowDecimalAxisLabels	Boolean	Allows dependent (horizontal) values to display as decimal numbers instead of integers. Default: false.
Label Position	labelPosition	Text	Determines where the label appears. Valid values: "ABOVE" (default) Displays the label above the component. "ADJACENT" Displays the label to the left of the component. "COLLAPSED" Hides the label. The label will still be read by screen readers; see accessibility considerations for more information. "JUSTIFIED" Aligns the label alongside the component starting at the edge of the page.
Help Tooltip	helpTooltip	Text	Displays a help icon with the specified text as a tooltip. The tooltip displays a maximum of 500 characters. The help icon does not show when the label position is "COLLAPSED".
Accessibility Text	accessibilityText	Text	Additional text to be announced by screen readers. Used only for accessibility; produces no visible change.
Visibility	showWhen	Boolean	Determines whether the component is displayed on the interface. When set to false, the component is hidden and is not evaluated. Default: true.
Color scheme	colorScheme	Any type	Determines which color scheme to use in the chart. Use one of the following valid values: "CLASSIC" (default), "MIDNIGHT", "OCEAN", "MOSS", "BERRY", "PARACHUTE", "RAINFOREST", "SUNSET" or define a custom color scheme using a!colorSchemeCustom. See Chart Color Scheme for color scheme examples.
Height	height	Text	Determines the chart height. Valid values: "MICRO", "SHORT", "MEDIUM", "TALL", "AUTO" (default). See Chart Heights for guidance on using the "MICRO" size.
X-Axis Style	xAxisStyle	Text	Determines how to display the labels and axis separators for the X-Axis. Valid values: "STANDARD" (default), "NONE".
Y-Axis Style	yAxisStyle	Text	Determines how to display the labels, axis separators, and grid lines for the Y-Axis. Valid values: "STANDARD" (default), "MINIMAL", "NONE".
Data	data	Any type	Reference to the record type used for the source of this chart. Can accept a!recordData or a record type reference.
Chart Configuration	config	BarChartConfig	Configures how to display data on the chart, including fields used for calculations and grouping, using a!barChartConfig().
Refresh Always	refreshAlways	Boolean	When true, chart data will be refreshed after each user interaction and each interval refresh. Default: false.
Refresh After	refreshAfter	List of Text String	Refreshes chart data each time a specified event completes. Valid values: "RECORD_ACTION".
Refresh After an Interval of Time	refreshInterval	Number (Decimal)	How often chart data gets refreshed in minutes. When null, chart data will not be refreshed on an interval. Valid values: "0.5", "1", "2", "3", "4", "5", "10", "30", and "60".
Refresh on Reference Variable Change	refreshOnReferencedVarChange	Boolean	When true, chart data will be refreshed each time the value of any variable referenced in the data parameter is updated. To refresh chart data when another variable that is not used in the data parameter changes, use refreshOnVarChange. Default: true.
Refresh on Variable Change	refreshOnVarChange	Any Type	Refreshes chart data each time any of these specific variables change. This allows you to refresh the chart data when a variable that is not referenced in the data parameter is updated. You can define a single variable (e.g. refreshOnVarChange: local!var1) or a list of variables (e.g. refreshOnVarChange: {local!var1, local!var2}).

Configuration

There are two ways to configure a bar chart:

1. Set a record type as the data source and define fields to display on the chart.
2. Perform your own query and define lists of data within the categories and series.

If you have a record type that uses a database as the source, or a record type with data sync enabled, we recommend using the record type as the source of your chart. This configuration is easier because Appian will perform the query for you and display the results directly in the chart.

If your record type uses a web service as the source and does not have data sync enabled, use the categories and series to construct the chart manually.

Using record data

Configuring a bar chart using a record type as the source requires using two parameters: data and config. Once you provide a record type in the data parameter and provide the fields in the config parameter, the chart displays the results.

See Chart Configuration Using Record Data for details on using a record type as the source. See Build Reports from Records for examples of reports created with different charts.

Using categories and series

When using categories and series, you must provide the list of data labels and values directly to these parameters.

Categories

• The order of items in the categories array determines the display order of categories on the chart with the left-most item in the array appearing at the top of the x-axis. The x-axis is the vertical axis since the bar data displays horizontally.
• For each null or empty item in the array passed to categories, [Category #] displays on the x-axis with # as the index number in the categories array of the null or empty item. For example, [Category 1].
• The index of each item in the categories array must match with the index of its series data value.

Series

• A single series item produces a bar for each categories item with all bars the same color. The data parameter should contain a list of values that match the size of the list for categories.
• Use a!chartSeries() to create the Chart Series array.
• If the series argument has a non-null label value paired with a 0, null, or empty data value, the data value still displays in the legend.
• If the series argument has a null or empty label value paired with a non-null data value, the label value displays as [Series #] with # as the index number of the data value. For example, [Series 1].
• If a color is defined at the series level, it will show for the given scheme and move the color scheme colors to the next series.

Series and stacking

• Multiple series items when stacking is NONE or null produces a set of bars for each categories item - one bar for each series item with each bar in that set a different color. The order of the label items determine the display order of the columns in each set with the first bar displays furthest from the axis.
• Multiple series items when stacking is NORMAL produces a single bar for each categories item with each series item displayed as a different segment of the bar in a different color, so they appear stacked on top of each other. The order of the label items determine the display order of the bar segments with the first label item appearing closest to the axis.
• Multiple series items when stacking is PERCENT_TO_TOTAL also shows a single bar for each category, but bars have a total height of 100%. Each value shows the percent contribution to the total within each category.

Usage considerations

Chart data and stacking

• If data values are small and less than a whole number, Appian recommends settings allowDecimalAxisLabels to true.
• If data contains a!recordData or a record type reference, the categories and series parameters are ignored.
• The Percent to Total stacking will update the axes and tooltips to show with a percentage. Also, the minimum and maximum y-axes values refer to percentages. For example, yAxisMax: 50 would set the maximum y-axis at 50%.

Charts height and background color

• When the "AUTO" height is used, the chart will show as Medium height with 20 or less categories. If more categories are provided, the chart will expand in height to ensure categories are not cut off.
• When the chart is placed in a colored card, the chart background will match the color of the card. Text labels and lines in the chart will also adjust if a dark background color is used. See the SAIL Design System for best practices on using charts with background colors.

Chart refresh behavior

• You can define a!refreshVariable parameters directly in the chart without creating additional local variables. The only exception being refreshOnVarChange, which refreshes the chart after a specific local variable has changed.
• When you use a record type as the source of your chart, it's recommended to use the refresh parameters in the chart instead of using local variables and the a!refreshVariable() function. This is because the refresh behavior will automatically apply to the fields specified in the data parameter of the chart.
• If you're not using a record type as the source of your chart, use local variables and the a!refreshVariable() function to define refresh behavior since you won't use the data parameter to configure your chart.

Examples

The examples below demonstrate how to configure your charts using categories and series. For examples on using record data, see Chart Configuration Using Record Data.

Single series bar chart with label, y-axis title, and no legend

Use the interactive editor below to test out your code:

Multiple series bar chart with label, y-axis title, and no stacking

Use the interactive editor below to test out your code:

Multiple series bar chart with label, y-axis title, and stacking

Use the interactive editor below to test out your code:

Feature compatibility

The table below lists this component's compatibility with various features in Appian.

Feature	Compatibility	Note
Portals	Compatible
Offline Mobile	Compatible
Sync-Time Custom Record Fields	Incompatible
Real-Time Custom Record Fields	Incompatible	Custom record fields that evaluate in real time must be configured using one or more Custom Field functions.
Process Reports	Incompatible	Cannot be used to configure a process report.
Process Events	Incompatible	Cannot be used to configure a process event node, such as a start event or timer event.