Creating a New Evaluation

Introduction

Source Selection is the process of creating, reviewing, and completing a vendor evaluation for goods and services needed to conduct business. This involves collecting and maintaining vendor information and evaluation factors that are assessed by different teams. The Government Source Selection (GSS) solution provides a guided, automated experience for collecting this information. After an evaluation is created, simple, informative record interfaces, enabled by Appian Records, allow end users to view and update this information.

This page provides instructions for creating a new evaluation.

Create evaluations

Creating a new evaluation is a guided experience that walks you through entering the information you need to start a vendor evaluation.

To create a new evaluation, you must be part of the AS GSS Create or Update Evaluation PM Access security group. The evaluation chairs and contracting groups are automatically included in this security group.

To create an evaluation:

1. Navigate to the My Workspace or Evaluations page.

2. Click Create New Evaluation to bring up the Create Evaluation wizard.

   

3. Enter a Solicitation PIID (Procurement Instrument Identifier), Title, and Description for the goods or services you are evaluating.
4. Upload Reference Documents.
   1. Click UPLOAD to bring up the file picker.
   2. Select the document to upload.
   3. Click to upload additional documents.

   Note:  PDF, DOC, DOCX, XLS, XLSX, PPT, and PPTX files are supported. Up to 15 document(s) can be uploaded at a time.

5. Select Contracting Officer, Contract Specialist, and Evaluation Chief using the auto-suggest dropdowns.
6. Select Yes or No using the Mask Evaluators during Evaluation radio button. When masked, evaluator names are substituted with aliases. Privileged users still see the actual names.
7. Select the Start Date and Due Date of the evaluation using the date pickers. These date fields determine when the evaluation starts and ends, and provide validation for any deadlines you define.
8. Select the Evaluation Method using the radio buttons. The evaluation method determines how your organization evaluates the vendor proposals.
9. Select if Weighted Factors are applicable using the radio buttons. Weighted Factors enable you to assign weights to factors and subfactors to specify their level of importance.
10. Select Required or Not Required using the Consensus Report Signatures radio button to determine if signing the consensus report is required for evaluation completion.

11. Click CREATE to create the evaluation and navigate to the Evaluation Created page.

    

12. Click GO TO EVALUATION to navigate to the created evaluation record.

    Tip:  Once the evaluation is created, you can either complete the setup on the evaluation record immediately or return to finish it later.

13. Click CONTINUE SETUP to bring up the Continue Setup wizard and complete the following steps:
    1. Add phases to specify the evaluation phases and deadlines.
    2. Add factors to use to evaluate each vendor.
    3. Enter weights to factors.
    4. Add vendors who have submitted proposals and upload their associated proposals.
    5. Add teams and add evaluators to the teams.
    6. Assign evaluators to factors.
    7. Review and start evaluation.

    

Add phases

The Phases tab enables you to specify the evaluation phases and deadlines. Select one or more phases, which are modified in Configuring Phases.

On the Phases tab:

1. Select the phase(s) for the evaluation using the checkbox(es).
2. Enter DURATION for the phase. Number only.
3. Enter the DURATION UNIT for the duration entered in the previous step. The duration units can be modified to reflect the organization. See Modifying Dropdowns for information on how to update these values.
4. Select START DATE for the phase using the date pickers. END DATE is auto-filled based on the defined duration, duration unit, and start date. The solution displays a validation message if the phase's end date exceeds the evaluation's end date.
5. Click NEXT to save changes and continue to add factors and subfactors, or click SAVE AND CLOSE to save changes and close the wizard to continue the setup later.

Add factors and subfactors

The Factors tab enables you to add the factors and subfactors to use to evaluate each vendor.

On the Factors tab:

1. Click + NEW FACTOR.
2. Enter factor ID, Title, Description, and Instructions using the text fields.
3. Select the Due Date using the date picker to define when the factor must be evaluated by.
4. Select the Factor Chair using the auto-suggest dropdown to assign a user as the factor's chair.

5. Select the Rating method to evaluate the factor using the dropdown.

   Note:  Select the rating method to reflect the needs of a specific organization. See Modifying Dropdowns for information on how to update these values.

   See the following table for more information on the pre-configured rating methods and rating values.

   Rating Method	Rating Values
   Color Rating	Blue, Purple, Green, Yellow, Red
   Adjective Rating	Outstanding, Good, Acceptable, Marginal, Unacceptable
   Risk Adjective Rating	Low, Moderate, High
   Number Rating	1, 2, 3, 4, 5
   Confidence Level Rating	Substantial, Satisfactory, Limited, No, Unknown
   Acceptable/Unacceptable Rating	Acceptable, Unacceptable

6. Click SAVE to add the factor.
7. Click + NEW FACTOR to add more factors.
8. Enter the subfactor ID, Title, Description, and Instructions using the text fields.
9. Select Due Date using the date picker.

10. Select the Rating method using the dropdown.

    Note:  Select the rating method to reflect the needs of a specific organization. See Modifying Dropdowns for information on how to update these values.

11. Click SAVE to add the subfactor.
12. Click +ADD to more subfactors.

13. Click EDIT and DELETE to edit and delete factors and subfactors, respectively.

    Caution:  Deleting a factor also deletes the associated subfactors.

14. Click NEXT to save changes and continue to enter weights, or click SAVE AND CLOSE to save changes and close the wizard to continue the setup later.

Enter weights

The Weights tab enables you to enter and assign weights to factors.

On the Weights tab:

1. Enter weight points for each factor and its subfactors. Numbers only.

   Note:  Adjust each factor’s weight to ensure their sum equals 100. Adjust each subfactor weight so their sum equals the total factor weight.

2. Click NEXT to save changes and continue to add vendors, or click SAVE AND CLOSE to save changes and close the wizard to continue the setup later.

Add vendors

The Vendors tab enables you to add vendors who have submitted proposals and upload their associated proposals.

On the Vendors tab:

1. Click +ADD VENDOR to bring up the Search Vendor section.
2. Enter a vendor UEI or CAGE in the search field and click SEARCH to initiate sync from SAM.gov and list the results.
3. Select a vendor. If the vendor record or SAM.gov contains the vendor's UEI or CAGE number, GSS displays the vendor and allows you to select it. If a vendor record does not exist in GSS for the vendor or the vendor is not in SAM.gov:
   1. Click manually create a vendor to bring up the Create New Vendor Profile.
   2. Enter the vendor’s Legal Name, UEI, DUNS, and CAGE.
4. Click NEXT to bring up the Vendor Details section.
5. Upload the vendor's proposal and other evaluation documents.
   1. Click UPLOAD to bring up the file picker.
   2. Select the document to upload.

   3. Click to upload additional documents.

      Note:  After the files are uploaded, the grid automatically populates with the name of each document. Each vendor document is only visible to evaluation chairs, members of the contracting personnel, and the evaluators assigned to the factors/subfactors associated with it.

6. Select the Factor or Subfactor associated with the vendor evaluation documents using the multi-select dropdown.
7. Select Proposal Submission Date using the date picker to define the vendor’s submission date.
8. Click ADD to add the vendor.
9. Click CONTINUE to navigate back to the Vendors section.
10. Click + ADD VENDOR to add more vendors.
11. Click Edit or Remove corresponding to a vendor to edit or delete it respectively.
12. Click NEXT to save changes and continue to add teams, or click SAVE AND CLOSE to save changes and close the wizard to continue the setup later.

Add teams

The Teams tab enables you to create evaluation teams and add evaluators to the teams.

On the Teams tab:

1. Click + NEW TEAM to navigate to the New Team section.
2. Enter a Team Title and Description that reflects the team's purpose.
3. Click SAVE to save changes.
4. Select evaluator(s) using the auto-suggest dropdown.
5. Click + ADD TEAM MEMBERS to add the selected evaluators to the team.
6. Select the team members checkbox(es) and click DELETE TEAM MEMBER to delete evaluators from the team.
7. Click + NEW TEAM to add more evaluator teams.
8. Click EDIT and DELETE to edit and delete evaluator teams respectively.
9. Click NEXT to save changes and continue to assign evaluators to factors, or click SAVE AND CLOSE to save changes and close the wizard to continue the setup later.

Assign evaluators to factors

The Assignment tab enables you to review the factors and subfactors created earlier and assign them evaluators.

On the Assignment tab:

1. Select the assignment’s Due date using the date picker.
2. Select the Evaluation Team using the dropdown.
3. Select the Evaluators using the multi-select dropdown.
4. Click COLLAPSE SUBFACTORS and EXPAND SUBFACTORS to toggle between view and hide subfactors.
5. Click APPLY EVALUATORS TO SUBFACTORS to duplicate factor’s evaluators to subfactors.
   1. Alternatively, select the subfactor's Due Date, Team, and Evaluators.

      Note:  Subfactor due date must not occur after factor due date.

6. Click SAVE AND CLOSE to save changes and navigate back to the evaluation record.

Review and start evaluation

On the evaluation record:

1. Review the defined evaluation details. Any missing information and errors are displayed on top of the evaluation record page.

   1. Click SHOW DETAILS to view the pending actions.

      

      Note:  If no errors appear and the START EVALUATION button is clickable, the evaluation is ready to start.

2. Click START EVALUATION to bring up the Start Evaluation confirmation dialog box.

   

3. Click START to start the evaluation.

   

Once the evaluation is started, all assigned evaluators receive their evaluation tasks.

See Managing Evaluations to walk through how to manage evaluations.

Feedback