Overview

This page provides guidance on how to use the Execute Stored Procedure smart service in your process model.

Stored procedures are a set of SQL statements that you can save in your database and use to query or modify data over and over again. The Execute Stored Procedure smart service lets you execute a stored procedure that is defined on any of the Appian supported relational databases that you have connected to.

To execute a stored procedure you need to provide:

• A data source connected system constant. Or for Admin console data sources, the name of the data source.
• The name of the stored procedure.
• Inputs to the stored procedure which correspond to the IN and INOUT parameters.

More information about the parameters can be found in the configuration options and database specific behaviors sections.

After a stored procedure is successfully executed, a map containing a list of result sets and a list of parameters corresponding to the OUT and INOUT values of the stored procedure is returned.

Permissions needed

If using a data source connected system, the user executing this activity must have Viewer permissions to the selected data source connected system in order to execute stored procedures.

Properties

• Category: Data Services

• Icon:

• Assignment Options - Unattended

Configuration options

This section contains tab configuration details specific to this smart service. For more information about common configurations see the Process Node Properties page.

Data tab

Node inputs

In addition to the parameters above, inputs with names corresponding to the IN and INOUT parameters of the stored procedure must be created manually. A custom input parameter must be provided for every IN and INOUT parameter in order to pass validations. IN and INOUT parameters can be configured to pass values into the stored procedure by setting the Value field. Remember, the name of each custom input must match the name of a corresponding stored procedure parameter.

Example of passing custom stored procedure inputs

Given a stored procedure with the following IN and INOUT parameters:

• IN parameter: customer_name
• INOUT parameter: customer_id

You can pass customer_name and customer_id into the stored procedure from a process variable by configuring a custom input as you see in the image below.

Note that the output for the INOUT parameter customer_id will be available in an activity class parameter in the outputs tab.

Running without validations

It is strongly recommended to run validations when executing stored procedures unless severe performance degradations are observed as a result.

If you choose not to run validations, the following rules will apply:

• You must add an input for each IN, INOUT, and OUT parameter to the stored procedure in the same order that they are listed in the stored procedure’s signature. If OUT parameters are not added as inputs, they will not be available in the ac!parameters activity class parameter.
• For most databases, stored procedures must not contain parameters with data types outside of Integer, Double, Date, Time, Timestamp, Varchar, and Boolean. In addition, the type of each input must correspond to the SQL data type of the stored procedure parameter, as reflected in the table below.

Depending on the type of database you are using, exceptions to the data type mappings above may apply. See database specific behaviors for more details.

Node outputs

In addition to the outputs above, custom outputs with names corresponding to the OUT, INOUT, and resultSets parameters of the stored procedures can be configured in the outputs tab.

Parameters can be accessed using the ac!parameters activity class parameter. Similarly, result sets can be accessed using the ac!resultSets activity class parameter. By parsing these outputs in a custom output expression, you can save individual stored procedure parameters and result sets into process variables.

Example of saving custom stored procedure outputs

Given a stored procedure that returns two result sets and the following OUT parameters:

• OUT parameter: customer_name
• OUT parameter: customer_id

You can save each result set and each OUT or INOUT parameter in its own process variable by using custom outputs with the following configurations.

• ac!parameters.customer_name is stored as pv!customer_name
• ac!parameters.customer_id is stored as pv!customer_id
• ac!resultSets[0] is stored as pv!first_result
• ac!resultSets[1] is stored as pv!second_result

In the image below, you can see how these configurations can be applied in the outputs tab of the smart service node.

Usage considerations

Limitations

Keep in mind the following default values and limitations when executing stored procedures:

These properties can also be configured to increase or decrease the default maximum value:

• For Appian Cloud customers, you can update these values by opening a support case.

• For self-managed installations, you can update these values by modifying the following properties in custom.properties:

  conf.executeStoredProcedure.limits.maxTimeout= conf.executeStoredProcedure.limits.maxRowsPerResultSet= conf.executeStoredProcedure.limits.maxTotalRows=

  For example:

  conf.executeStoredProcedure.limits.maxTimeout=500

  The configured value is 500 seconds. With this setting, the value provided for the timeout parameter cannot exceed 500 seconds.

Data sync behavior for record types

If you use this smart service to add, update, or delete data in a database table, and that table is the source of a record type with data sync enabled, those changes will not be automatically synced in Appian.

To sync changes made by this smart service, use the Sync Records smart service. Any data changed by this smart service will also be synced during the next scheduled sync or if you trigger a manual sync.

To automatically sync changes made to a database table, consider using the following smart services instead:

• Write to Data Store Entity
• Write to Multiple Data Store Entities
• Delete from Data Store Entities

Database specific behaviors

Stored procedures can be executed on any Appian supported relational databases. Below, we have listed some database specific behaviors that impact how you execute stored procedures from Appian.

Oracle

• Capitalize all letters in the stored procedure name and input parameters.
• For a stored procedure that is defined within a package in an Oracle database, enter the procedure name as PACKAGE_NAME.STORED_PROCEDURE_NAME
• Access the stored procedure query results in the parameters key using the name that corresponds to the cursor parameter, instead of in results.

DB2

• Capitalize all letters in the stored procedure name and input parameters.
• Access the stored procedure query results in the parameters key using the name that corresponds to the cursor parameter, instead of in results.

PostgreSQL

• The stored procedure name and input parameters are case sensitive.
• Add the escapeSyntaxCallMode=callIfNoReturn or escapeSyntaxCallMode=call parameter to the connectionURL of the data source.
• Access the stored procedure query results in the parameters key using the name that corresponds to the cursor parameter, instead of in results.
• When executing stored procedures from a process model node with validations disabled, parameters of type Number (Integer) in Appian will be passed to the stored procedure as type BIGINT.

a!executeStoredProcedureOnSave()

The Execute Stored Procedure smart service is available as an expression function that can be executed inside a saveInto on a component or as part of a Web API.

For information on how to execute a read-only stored procedure from anywhere in Appian, see the a!executeStoredProcedureForQuery() function. Unlike the smart service function, a!executeStoredProcedureForQuery() is not restricted to being called inside a saveInto. However, the a!executeStoredProcedureForQuery() function should not be used to execute stored procedures that modify data.

Syntax

a!executeStoredProcedureOnSave( dataSource, procedureName, inputs, timeout, autoCommit, onSuccess, onError )

Parameters

Example

For the example below, we define a stored procedure that writes to a database and show how it can be executed using the a!executeStoredProcedureOnSave() function.

Stored procedure details:

• Stored procedure name: add_or_update_customer_and_case
• INOUT parameters: customer_id, case_id
• IN parameters: name, status, description
• MariaDB stored procedure definition:

  1
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  DELIMITER //
  CREATE OR REPLACE PROCEDURE add_or_update_customer_and_case(
    INOUT customer_id INT,
    IN name VARCHAR(255),
    INOUT case_id INT,
    IN status VARCHAR(255),
    IN description VARCHAR(255)
  )
  BEGIN
  IF(customer_id IS NULL) THEN
    INSERT INTO customers(name, email, phone_number) VALUES (name, null, null);
  END IF;
  IF(case_id IS NULL) THEN 
    INSERT INTO cases(status, description) VALUES (status, description);
  ELSE 
    UPDATE cases SET status = status, description = description WHERE case_id = case_id;
  END IF;
  END //
  DELIMITER ;
  

To call the stored procedure that we've defined, we can use the code below inside a saveInto.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
a!executeStoredProcedureOnSave(
	dataSource: cons!MARIADB_POINTER,
	procedureName: "add_or_update_customer_and_case",
	inputs: {
		a!storedProcedureInput(name: "customer_id", value: local!customerId),
		a!storedProcedureInput(name: "name", value: local!name),
		a!storedProcedureInput(name: "case_id", value: local!caseId),
		a!storedProcedureInput(name: "status", value: local!status),
		a!storedProcedureInput(name: "description", value: local!description),
	},
	onSuccess: {
		a!save(local!customerId, fv!parameters.customer_id),
		a!save(local!caseId, fv!parameters.case_id),
	},
	onError: {
		a!save{local!errorMessage, fv!errorMessage}
	}
)

After the stored procedure is successfully executed, you can see that the INOUT parameters customer_id and case_id will be loaded into local variables from the fv!parameters function variable. Note that for this stored procedure there are no queries, so the fv!resultSets function variable will contain an empty list.

In the event that an error occurs, local!errorMessage will be populated with the error message from the function variable fv!errorMessage.

Feature compatibility