Free cookie consent management tool by TermsFeed Response Hub User Guide [Workforce Safety v14]
Page not found in the selected version; redirected to the home page.
Response Hub User Guide
This version of Workforce Safety is not supported and this content is no longer being maintained. See What's New with Workforce Safety? for information on the latest release.
This content applies solely to Workforce Safety, which must be purchased separately from the Appian base platform. This content was written for Appian 21.4 and may not reflect the interfaces or functionality of other Appian versions.

Introduction

We created Workforce Safety to help organizations with a unique problem—how can they keep their employees safe during the COVID-19 pandemic?

Reacting quickly to possible exposures while maintaining employee anonymity is of paramount importance.

This page outlines how response managers, screeners, and coordinators use the Response Hub to manage crises.

See also

Requesting a pass on behalf of users

Screeners and response managers can request a pass for a user in the Activity tab in the Response Hub.

request a pass on behalf of user

To request a pass on mobile, click ACTIONS, then Request a Pass on Behalf of User.

Mobile request pass for user

Screeners can also request passes for visitors, but the visitor must have a visit scheduled first. See On-site registration process for more details on this process.

Note that capacity restrictions and cohorts do not apply to visitors.

If Enforce Area Capacity Restrictions is toggled on, an area selection will display on the pass request.

Response managers and screeners will see the remaining capacity for each area. If an area is full, they can still select the area. At the end of the pass request, they will be asked to override the capacity restriction, or select another area.

screener capacity override

If capacity restriction is overridden, it will display on the user's Pass Request tab for that pass request.

capacity override

If Cohort Management  is toggled on, a message will display for any days that aren't associated with the user's cohort. Screeners and response managers can still select the day and override this restriction.

screener_cohort_override.png

After they submit the request, the result of the request displays. See Pass eligibility for more information on how pass eligibility is determined.

pass results

Scheduling a visit for visitors

Screeners and response managers can schedule a visit for visitors in the Response Hub. Visitors must have a visit scheduled before a screener can request a pass for them. See Managing Visitors for more information on visitors.

To schedule a visit from the Response Hub:

  1. (Desktop) Click SCHEDULE A VISIT.

    screener schedule visit action

  2. (Mobile) Click ACTIONS > Schedule a Visit.

    Mobile schedule visit

  3. Select a facility and click NEXT.
    • Tip: You can select closed facilities since some visitors, such as cleaning and maintenance crews, may still need access to facilities that are closed.
  4. Select the day or day range that the visitor should be able to visit and click NEXT.
  5. Select the visitor.
    • If the visitor is already in the system, find and select them in the Select Visitor field.
      • Tip: If a message displays that says the visitor is not eligible to visit, it is likely because they are in isolation or have an open incident.
    • If the visitor is new, click + NEW VISITOR, then enter a first and last name and an email address and click ADD.
      • Note: The email address will be the visitor's username.
  6. Click Finish.

After the visit is scheduled, the visitor can request a pass. If they are requesting a pass themselves, they will need to reset their temporary password using the instructions in the account creation email that is sent to them. Screeners and response managers can also request a pass on behalf of the visitor.

Scanning passes

Screeners and response managers can scan mobile passes using the Appian mobile application.

If the user is eligible to return for that calendar day for the selected location, VALID PASS displays. Otherwise, INVALID PASS displays. If the pass is invalid either because it is for a different day or location, the reason displays.

valid and invalid passes

To scan a pass:

  1. Log in to the mobile Appian application.
    • Note: The Scan User Pass option will not display if Workforce Safety is opened in a mobile browser. It only displays from the Appian mobile application.
  2. Go to the Activity tab and click SCAN USER PASS.

    scan user pass

  3. For Select Facility, use the picker to find the facility that you are scanning passes for.
  4. Tap the barcode icon to launch the QR code scanner.
    • Note: You may need to grant access to the mobile device's camera.

      select_facility_scan_pass.png

  5. Scan the pass using the mobile device's camera. Either VALID PASS or INVALID PASS displays.
  6. Click SCAN ANOTHER to go back to the Scan User Pass screen. The facility defaults to the last facility selected.

When a valid pass is scanned, the timestamp is saved to record that the user visited the facility that day.

Valid passes can be scanned multiple times and will be valid until they have expired or been revoked due to a disqualifying response on a questionnaire.

Matching help requests with volunteers

If the Community Volunteering and Help Requests feature option is toggled on, response managers and coordinators can match help requests with volunteers.

To match a help request with a volunteer:

  1. For response managers, from the ACTIVITY page go to the Community Help tab. The Community Help report on the ACTIVITY page displays automatically for coordinators when they sign in.
  2. In the Help Request Details list, click an Unassigned help request.

    unassigned help request.png

  3. Click MATCH WITH VOLUNTEER.
  4. Select a volunteer from the list and click ASSIGN CASE.

    match with volunteer

Tip:  The filters are automatically set to only show volunteers that said they are willing to help with that type of request based on the category of request and whether it is in-person or virtual.

You can also match an assigned help request to a different volunteer by opening the help request and clicking REASSIGN.

When the help request is complete, the response manager, coordinator, volunteer, or requestor can CLOSE the help request.

close_help_request.png

Managing announcements

To keep your users up to date with the latest news, response and configuration managers can post announcements on their Workforce Safety homepage. You can also choose to send an email or push notification to mobile devices when you post the announcement.

three announcement types

In order to receive push notifications, users must have downloaded and logged in to the Appian application on their mobile device. They also must have notifications turned on for the Appian application in their device settings.

Up to five announcements can be displayed at a time. If you have reached the limit, you must archive an announcement to post a new one.

The newest announcement will display on every user's homepage until it is archived or a new announcement is posted. Users can click the link to view all posted announcements, which display in the order that they were created.

View more announcements

Posting announcements

To display an announcement on the Workforce Safety homepage for all users, post it. Optionally, you can send an email or push notification when you post the announcement.

To post an announcement:

  1. From the CONFIGURE page, click ANNOUNCEMENTS.
  2. If you see a Maximum Number of Announcements Reached message, archive an announcement.
  3. Enter a Title that is less than 100 characters.
  4. Enter a Message that is less than 500 characters.
  5. Select if you would like to send an email or push notification when you post the announcement.
  6. Click POST ANNOUNCEMENT.

post announcement

Archiving announcements

To remove an announcement from the Workforce Safety homepage of all users, archive it.

To archive an announcement:

  1. From the CONFIGURE page, click ANNOUNCEMENTS.
  2. Next to the announcement you would like to archive, click ARCHIVE.

You can view archived announcements by clicking the ARCHIVED tab.

archive_announcement.png

Tip:  The capabilities in the following sections are only available to response managers.

COVID-19 isolation incidents

COVID-19 isolation incidents are essential to managing your COVID-19 response. Response managers must be made aware of all employees who tested positive for COVID-19 or were exposed to someone who tested positive for COVID-19. They must also be aware of employees that show symptoms of COVID-19 in order to protect the workplace community.

Workforce Safety helps response managers with the enormous task of keeping their communities safe by:

  • Automating the placement of employees in and out of isolation.
  • Providing an easy way to notify, isolate, and request tests from exposed employees.
  • Providing an easy way to update affected facilities and areas.

How COVID-19 isolation incidents are created

Users and response managers can manually create COVID-19 isolation incidents by selecting COVID-19 RELATED INCIDENT when they create an incident.

create_covid_incident.png

A COVID-19 related incident can also be created automatically in the following situations:

How COVID-19 isolation incidents affect users

Contact tracing

When a COVID-19 isolation incident is created by a user or response manager, all of the people that the user reported having contact with during the past 14 days is displayed in the Contact Tracing tab of the incident. Since visitors do not log contacts, visitor contact tracing information is gathered by users who have reported having contact with the visitor. After a COVID-19 isolation incident is logged, a response manager can also gather contact tracing information for a user.

The Contact Tracing tab of the incident displays any individuals the user was reported to have come in contact with during the past 14 days.

Additionally, the Exposed Areas section will display all users that reported contact with an area on the same day that the affected individual did.

contact_tracing_tab.png

Automatic isolation

Whether the COVID-19 isolation incident is created manually or automatically, the affected person will be automatically placed into isolation and any active passes they have will be revoked. This means that they cannot take a survey or request a pass. Instead, they will see an isolation section on their home page. If Isolation Updates are active, and the visibility for at least one isolation question is applicable to a user, that user will be asked to complete an isolation update.

isolation update

Only one COVID-19 isolation incident at a time

Users can only have one open COVID-19 isolation incident at a time. Both users and response managers cannot create a second COVID-19 isolation incident for the same user.

When a COVID-19 isolation incident would be created automatically by Workforce Safety, such as when a positive test result is submitted, but the user already has an open COVID-19 isolation case, a new incident will not be created. However, if Workforce Safety is configured to automatically remove users from isolation, the countdown for removing the user and/or sending a test request is reset.

Tip:  If you have upgraded Workforce Safety from v5.0 or older, users will be able to have more than one COVID-19 isolation incident open at a time because their older incidents will remain open.

Responding to COVID-19 isolation incidents

Generally, the flow that response managers will take when responding to COVID-19 isolation incidents consists of four steps:

  1. Manage the incident.
  2. Manage the impacted user.
  3. Perform contact tracing to manage exposed users and areas.
  4. Close the incident.

Managing a COVID-19 isolation incident

Managing an incident includes determining if the incident is valid and assigning it to a response manager for follow up. This is also how you can add response manager notes, which are only visible to other response managers.

To manage a COVID-19 isolation incident:

  1. From the INCIDENTS page, find and open the incident.
  2. If the incident was created in error, close the incident and choose Invalid.
  3. If the incident is valid, update it to assign it to a response manager. Optionally, you can add a Description, Response Manager Notes, or Attachments.

update_covid_incident.png

Managing the impacted user

When you manage a COVID-19 isolation case, you may want to remove the user from isolation manually, manage test requests, or close the user's primary facility. COVID-19 isolation incidents include quick actions to perform these tasks.

Note that managing incidents for visitors is a bit different since you can't request tests for them and they don't have a primary facility.

To manage the impacted user, you can take the following actions, when necessary:

  1. In the COVID-19 isolation incident, go to the Summary tab.
  2. To manage test requests for the user, click Upload Test Result or Request a Test depending on the test request status of the user.

    covid_incident_actions.png

    • You can also click the Testing Status card to go directly to the user's test record, if it exists.

      covid19_test_status_card.png

  3. To update the status of the user's primary facility, click MANAGE FACILITIES.

    incident_facility_update.png

Performing contact tracing

Determining who was exposed to a user before they were diagnosed as positive for COVID-19 is very important to limit the spread of COVID-19. COVID-19 isolation incidents list all of the people that the user reported having contact with, along with all of the people who reported having contact with the user. Additionally, it also shows all users who reported contact with an area on the same day that the user reported being in the area.

Workforce Safety uses smart suggestions to help you log contacts in the Log Contacts form. These suggestions are based on a multitude of data points including a user’s past logged contacts, the facilities and areas they received a pass for and visited on a given day, and department association data. This feature provides users with up to 20 contact suggestions, allowing them to quickly log a contact by simply tapping a suggestion card.

These users may have been exposed to the virus and may need to be isolated, notified, or tested. You may also need to alert all Workforce Safety users that there is a COVID-19 isolation incident via an announcement. You can perform all of these actions from the Contact Tracing tab in the COVID-19 incident.

Note:  Never send any personally identifying information of any affected individuals when notifying exposed people.

To perform contact tracing for exposed people and areas:

  1. In the COVID-19 isolation incident, go to the Contact Tracing tab.
  2. Use the Exposed People section to manage the people that the user reported contact with.
    • Click Notify to send an email to the users listed in the Exposed People section.
    • Click Isolate to put the users listed in the Exposed People section into isolation and revoke any active passes.
    • Click Request Tests to request tests from the users listed in the Exposed People section.

      contact tracing exposed people

  3. In the Exposed Areas section, click Manage Areas to update the status of the areas that the user reported contact with.
  4. Use the Exposed Areas section to manage the people that reported contact with an area on the same day that the affected individual did.
    • Click an area, then click Notify, Isolate, or Request Tests to perform the action for the users that were exposed to that area.

      contact tracing exposed areas

  5. At the top of the page, click More actions > POST ANNOUNCEMENT to post an announcement to the entire organization about any exposures or closed locations.

Updating contacts

After a COVID-19 isolation incident is logged, you may need to update the incident's contact tracing information. This could include additional contactsor areas that were exposed to the user during the 14 days before the incident was reported.

The UPDATE CONTACTS action on the incident's Contact Tracing tab allows response managers to add, remove, or edit close contacts or areas for a user. Note that you can add one or more people or areas to a user's contact tracing information.

To update the contacts for a user's COVID-19 isolation incident:

  1. From the INCIDENTS page, find and open the incident.
  2. Select the Contact Tracing tab and click UPDATE CONTACTS.
  3. Click ADD PEOPLE and enter the following information in the Exposed People section:
    • Most Recent Contact Date
    • Exposed People
    • Exposure Description
  4. Click ADD.
  5. In the left pane, select Exposed Areas.
  6. Click ADD AREAS and enter the following information in the Exposed Areas section:
    • Most Recent Contact Date
    • Exposed Areas
    • Exposure Description
  7. Click ADD.
  8. Click UPDATE.

Close the incident

You may also need to close the incident, but this will happen automatically if you have Workforce Safety configured to remove users from isolation automatically.

To close an incident manually:

  1. In the COVID-19 isolation incident, click Close Incident.
  2. Choose whether you are closing the incident because it is Resolved or it was an Invalid incident.
  3. Choose whether to remove the impacted user from isolation by selecting or deselecting the Remove [User] from isolation checkbox. Click CLOSE INCIDENT.

close incident

Reopening closed incidents

You can reopen closed COVID-19 isolation incidents. If you do, the user will automatically be placed into isolation again.

reopen incident

Removing a user from isolation manually

You can configure Workforce Safety to remove users from isolation automatically. However, you can also remove a user from isolation manually from their user summary.

Note:  If you remove a user from isolation that has an open COVID-19 isolation incident, the incident will be automatically closed.

To manually remove a user from isolation:

  1. From anywhere in the Response Hub, click the user's name and go to the Summary tab.
  2. Click REMOVE USER FROM ISOLATION.
  3. Confirm the action by clicking REMOVE FROM ISOLATION.

    remove user from isolation

The user's status updates to the last status they were in before being placed into isolation, either Qualified, Not Qualified, or Status Pending.

Isolating a user manually

More than likely, users will be put into isolation through a COVID-19 isolation incident, or through contact tracing. However, you can also manually put a user into isolation from their user summary.

After you isolate a user, any active passes they have will be revoked.

To manually put a user into isolation:

  1. From anywhere in the Response Hub, click the user's name and go to the Summary tab.
  2. Click ISOLATE USER.
  3. Enter a Guidance Message that you would like to email to the user.
    • Note: For example, you may want to explain how often they should complete the isolation update. This default message can be updated from the Configure page.
  4. Click PLACE IN ISOLATION.

    isolated status update

Skip survey for a user

If there is an active survey and a user receives a Not Eligible status after completing it, or they haven't taken it yet, response managers can choose to skip the survey for the user.

If you skip the survey for a user, they will no longer be able to complete the currently active survey.

To skip the survey for a user:

  1. From anywhere in the Response Hub, click the user's name and go to the Summary tab.
  2. Click SKIP SURVEY.
    • Tip: If there is no active survey, this action does not display.

    update user status for survey

  3. Confirm the action by clicking SKIP SURVEY.

    update survey status

The user will be placed in a Qualified state and will be able to request a pass immediately.

Requesting a test

Response managers can request that users take COVID-19 tests either from the user's profile, the People page, or the Contact Tracing tab of a COVID-19 isolation incident. They can determine their own process for testing and can notify individuals of that process when they request a test.

To request a test for the employee's profile:

  1. Go to the PEOPLE page.
  2. Enter an employee's name in the Search field and click SEARCH.
  3. In the Last Test Result section, click the ellipsis icon and select Request a test.
  4. Enter a Batch Name.
  5. (Optional) Enter a Batch Description.
  6. Select if you would like to require response managers to verify the test results. See Verifying test results for more information.
  7. Enter Testing Guidance that you would like to display for users.
  8. Click NEXT.

    request_covid_tests.png

  9. The employee's who will be sent a test will display. Click SEND REQUESTS.

After test request is sent, the employee can acknowledge and submit their test result.

From the PEOPLE page, response managers can request test results from individuals or groups. This also includes the ability to select a random sample from a group. This can help response managers determine the spread of an outbreak, check the status of a population, and target individuals for testing.

To request COVID-19 tests from the PEOPLE page:

  1. Go to the PEOPLE page.
  2. Click REQUEST TESTS.
  3. Filter the list to select the user or users that you would like to test. You can select one or more of the following filters:
    • User
    • Role
    • Primary Facility
    • Lasted Tested On or After
    • Last Test Result
    • Active Test
    • Past Eligibility
    • Department

    test_filters.png

  4. Click NEXT.
  5. Enter a Batch Name.
  6. (Optional) Enter a Batch Description.
  7. If you selected at least ten users, select if you would like to request COVID-19 tests for a random sample of the selected users, then enter the random sampling percentage.
  8. If you selected at least three users, select if you would like to request a pooled testing result. This will require the response manager to upload the test result.
  9. If you did not select a batch testing result, select if you would like to require response managers to verify the test results. See Verifying test results for more information.
  10. Enter Testing Guidance that you would like to display for users.
  11. Click NEXT.

    request_covid_tests.png

  12. A list of the users who will be sent a test will display. Click SEND REQUESTS.

    test_request_review_users.png

After test result requests are sent, users can acknowledge and submit their test results.

For any test request that has Yes selected for Require Response Manager Verification of Test Result Evidence?, response managers will have to approve or reject the test result.

Response managers can also provide test results on behalf of users. For pooled testing, response managers must always provide the test results.

Verifying test results

For any COVID-19 test request that has Yes selected for Require Response Manager Verification of Test Result Evidence?, response managers will have to approve the result in order for the test result request to be completed. If they reject the test result, the user will be sent an email with the reason and will be requested to submit their results again.

To verify a test result:

  1. On the ACTIVITY page, go to the INDIVIDUAL TESTS tab.
  2. To filter the results to only the ones that require verification, for the Request Status filter, select Pending Verification.
  3. Click the Request number for the request that you would like to verify.

    review test pending verification filter

  4. Click APPROVE or REJECT.

    review test approve or reject

  5. If the result was rejected, enter the reason, then click REJECT. An email will be sent to the user with the reason and they will be asked to submit their test results again.

    review test rejected

  6. If the result is approved, click APPROVE to complete the test result.

    review test approve

After the test result is approved, the Request Status updates to Completed and the Result displays for the user.

review test status

Providing test results

If the organization is coordinating their own COVID-19 testing, response managers may receive the test results and be able to submit them on behalf of users. Additionally, for pooled testing, response managers must be the ones to submit the test result since all of the samples for the individuals are combined into one sample. Because of this, response managers can submit test results from the Tests report.

To provide a test result for an individual test:

  1. On the ACTIVITY page, go to the INDIVIDUAL TESTS tab.
  2. Select the user that you would like to provide a test result for.
  3. Click PROVIDE TEST RESULT.

    provide test result button

  4. Enter the information for the test and click SUBMIT.

    provide test result screen

The Request Status for the user is updated to Completed and the Result displays for the user. A review is not required.

provide test update status

To provide a test result for a pooled test:

  1. On the ACTIVITY page, go to the POOLED TESTS tab.
  2. Select the pool request that you would like to provide a test result for.
  3. Click PROVIDE TEST RESULT.

    provide test result button pool

  4. Enter the information for the test and click SUBMIT.

    provide test result screen pool

If the pool test result is negative, the Result for all individuals in the pool will be updated to Negative. If the pool test result is positive, the Result for all individuals in the pool will be updated to No Result and response managers should request individual test results from the group.

provide test update status pool

Verifying proof of vaccination

If the Require Proof of Vaccination Verification toggle is turned on, Response managers can quickly verify proof of vaccination for all employees who have uploaded vaccination documentation to their profile form.

vaccVerifyConfig.png

After a user provides proof of vaccination, they'll show up in the Vaccination Verification review portal. To quickly determine if you have employees that require a verification review, navigate to the INCIDENTS page and look for the alert banner at the top of the page. This banner displays how many employees have submitted their proof of vaccination and are in the review queue.

verifyBanner.png

Click VERIFY PROOF OF VACCINATION to access the review portal. In the left panel, you'll see an ordered list of all employees who have submitted their proof of vaccination by submission date.

vaccination_review_portal.png

When you click on an employees in the queue, you'll also see relevant vaccination information they provided, including the vaccine name/manufacturer, the most recent date of their first and second vaccination dose, and their uploaded documentation.

To verify vaccination proof:

  1. From the INCIDENTS page, click VERIFY PROOF OF VACCINATION.
  2. In the left pane, locate the employees list in the review queue.
    • Note: By default, the employees list is automatically sorted on the earliest vaccination submission date to the latest.
  3. Review the uploaded documentation in the Proof of Vaccination document window.
  4. Under YOUR REVIEW, select Yes, verify to confirm the employees's proof of vaccination or select No, send back to employees name to reject the employee's proof of vaccination.
    • Note: If you select No, send back to employees name, you must provide a feedback comment in the provided field, which will be visible to the employees when they edit their vaccination information.
  5. Click SUBMIT.
  6. Repeat steps 3-5 for each employees in the review queue.

Verifying vaccine boosters

If you enabled the Booster Doses setting, only new users with a Partially Vaccinated and Fully Vaccinated vaccination status who match all of the criteria for one of the user groups listed below will require vaccination verification. These users are added to the Vaccination Verification queue:

  • User Group 1:
    • The Booster Doses setting is enabled.
    • Your organization changed its Fully Vaccinated policy to require boosters.
    • The user's initial 1 or 2- dose vaccination information and documentation has not been verified by a response manager prior to enabling booster dose collection.
    • The user has not submitted their required booster vaccine information based on a policy change.
  • User Group 2:
    • The Booster Doses setting is enabled.
    • Your organization changed its Fully Vaccinated policy to require boosters.
    • The user's initial 1 or 2- dose vaccination information and documentation has not been verified by a response manager prior to enabling the booster dose collection.
    • The user has submitted the required booster vaccine information based on a policy change.
  • User Group 3:
    • The Booster dose collection is enabled but submission is optional.
    • Your organization did not change its Fully Vaccinated policy.
    • The user's initial 1 or 2- dose vaccination information and documentation has not been verified by a response manager.
    • The user has voluntarily submitted booster vaccine information.
  • User Group 4:
    • The user's initial 1 or 2- dose vaccination information and documentation has not been verified by a response manager.

Additionally, existing users who have already submitted their Fully Vaccinated status and documentation for the initial 1 or 2-dose vaccine, and had it verified by a response manager are added to the verification queue again, only if:

  • The Booster Doses setting is enabled.
  • The user was classified as Fully Vaccinated prior to enabling the Booster Doses setting.
  • Your organization changed its Fully Vaccinated policy to require boosters.
  • The user has submitted their required booster vaccine information based on a policy change but it has not been verified by a response manager.

Only users matching any of these booster groups along with users who submitted vaccination information for the 1 or 2-dose series will show up in the total count of users in the Vaccination Verification banner on the INCIDENTS page:

verify_vaccination_banner.png

Your response managers can click VERIFY PROOF OF VACCINATION to quickly review the queue of employees. Highlighting a specific user in the queue will display their vaccination information in the preview screen. If the employee submitted information for one or more booster doses, the Booster Doses section will display the dose date, vaccine name and manufacturer, and an image of their vaccination documentation for the most recent booster dose they received.

vaccination_verification_queue_booster.png

If your response managers are required to review the validity of the employee's vaccination information for the initial 1 or 2-dose series again and their booster information and documentation, the YOUR REVIEW section allows them to select Yes, verify to approve or No send back to… to deny.

vaccination_verification_queue_booster_review.png

Tracking vaccination exemptions

Your organization may require COVID-19 vaccination as a requirement to return to workplace. Alternatively, it may offer routine testing in lieu of mandatory immunization in order to keep the community safe from the risk of exposure while on site.

Your organization may require COVID-19 vaccination as a requirement to return to campus. Alternatively, it may offer routine testing in lieu of mandatory immunization in order to keep the community safe from the risk of exposure while on site.

Some employees may be approved for an exemption from immunization for one of the following reasons:

  • Medical: The user has been determined to have a medical contraindication that exempts them from receiving the COVID-19 vaccine
  • Religious: The user has been determined to have sincerely held religious beliefs, practices, or observances that exempt them from receiving the COVID-19 vaccine
  • Other: This reason can be used if your organization does not desire to track that the exemption is medical or religious in nature, but still wishes to record that the user has one.

    • Alternatively, if a medical and religious exemption does not apply to a specific user, Other may be appropriate. Please note that if you select _Other-, you must also include a note.

To track these users, you can record their exemption status directly in their People record.

vaccination_status_exempt.png

In order to assign a user an exemption, you must select a reason for the exemption and enter notes to document the exemption.

vaccination_status_exempt_reason.png

After you update the employee's People record by marking them exempt from the Summary tab, the employee will see their vaccination status as read-only in their user profile.

vaccination_status_exempt_readonly.png

If a user who has an exemption decides to get vaccinated at a later date, you must first remove the exemption from their People record before they can update their profile with a new vaccination status. Removing the exemption will delete any data associated with the exemption and reset the user's vaccination status to the status that was recorded prior to them being marked as exempt. It will also enable the user to select a different vaccination status.

Deleting user data

If a user requests to have their data removed from Workforce Safety, response managers can do this using the Delete User Data option. This option allows you to delete user pass requests and survey responses, help requests, incidents, or volunteer information.

Deleting data affects assignments for existing incidents and help requests. For example, if a volunteer is assigned to a help request and their data is deleted, the help request will become unassigned.

COVID-19 isolation incidents cannot be deleted from this page.

Tip:  You can't delete specific rows of information. You can only delete all of the information of a certain type.

To delete user data:

  1. From anywhere in the Response Hub, click the user's name and go to the Summary tab.
  2. Click DELETE USER DATA.
  3. Click the delete button for the data that you would like to remove.
  4. Confirm that you would like to delete the data.
  5. Repeat for each information type.

delete user data

Response Hub User Guide

FEEDBACK