Transform and Load Data

Transformation Projects

After you've created your data sets, the next step is to create a transformation project.

On the Transformation Projects tab, you can create transformation projects to transform data sets into event logs. Mining Prep must transform data sets into event logs for process mining analysis. An event log is a list of events that process mining uses to analyze processes. Events represent activities in process mining. Activities are tasks in a business process that may be automated or performed by a human. They are often associated with start and end time stamps, who performed the activity, or how much the activity cost.

To create a transformation project, click the Add button on the Transformation Projects tab. You can also create a transformation project directly from a data set by clicking the Create Transformation Project button.

Transformation projects consist of:

• Data Sets
• Building Blocks
• Transformation Actions

Once you've built the transformation project, you can click the Transform & Load button to execute the transformation actions and load the event log into Process Mining.

Transformation Project Statuses

Transformation project statuses indicate the execution status of the project whenever you manually or automatically execute a transformation project.

Statuses display in the Status column alongside a time stamp that indicates when the status occurred:

• Running: The transformation project is currently extracting, transforming, and loading into Process Mining.
• Completed: The transformation project successfully executed, and the event log is available in Process Mining.
• Failed: The transformation project did not execute successfully due to an error.

Building blocks

Use building blocks to organize your transformation projects. A building block is automatically created when you add a transformation project.

Building blocks can contain one or more data sets.

In each building block, you identify the case ID, events, and attributes for the data set. You must define these properties before you can run the final transformation. You also add transformation actions to building blocks. The final transformation is comprised of a series of transformation actions. A transformation action defines a single data manipulation instance.

Building blocks can contain one or many data sets. If you add multiple data sets to a single building block, they must share a common column of values to serve as a key.

During the final transformation, Mining Prep automatically combines all valid building blocks into one event log for process mining analysis.

Add data sets to building blocks

After you add a new building block, you can choose to add an existing or new data set.

To add an existing data set to a building block:

1. Select the data set from the drop-down field in the USE DATA SOURCE panel.
2. Click Use Data Source.

To add a new data set to a building block:

1. Click Upload Data Source in the USE DATA SOURCE panel.
2. Click the Select file button and select the CSV file.
3. The fields on the window automatically populate. Edit the auto-populated values as necessary.
4. Click the Upload button.

Transformation actions

Transformation actions define changes to the data's format, structure, and name in the event log. You add transformation actions from the building-block level, and these actions only apply to data inside the building block.

To create a complete event log that process mining can analyze, it must contain the following items:

• Case ID
• Events
• Case Attributes (optional)

It is common to need to transform your data set so that you can define these properties. For example, events must contain columns in a datetime format to serve as time stamps. You can add a date conversion transformation action to a column so that it contains the correct data type. See Identify data properties for more information.

Transformation building blocks store transformation actions. You access these actions from a building block.

To add a transformation action:

1. Add a data set to the building block if you haven't already.
2. Click the Add button in the Transformation Actions panel.
3. Select the transformation action you want to add.
4. Complete the required fields in the right-hand panel.
5. Click Preview to verify the transformation result.
6. Click Save to add the transformation action to the building block.

Mining prep supports the following transformation actions:

• Merge Columns
• Match Columns
• Replace Values
• Filter
• Add Data
• Rename Column
• Date Conversion

Match columns

The match columns transformation action adds new columns and populates them according to match conditions.

To create a new column, enter the new column name in the New Column Name field.

After creating the column, you need to specify its data type in the Column Type field. In the preceding example, the new column is a string type. The following table describes the column types you can select:

Type	Description	Example
String	Text or combinations of alphabetical and numerical characters.	jdoe44
Integer	Whole, non-decimal numbers.	8675
Double	Double-precision floating-point numbers.	1403.22

After selecting the data type, you can define the conditions that determine how the match column populates. Each condition starts with a comparison between two columns. If the comparison is true, the data from the Then field is returned; if the comparison is false, the data from the IF NOT THEN field is returned.

The comparison operators you can choose from are:

Comparison Operators	Description	Example
=	is equal to	1=2 returns false
!=	is not equal to	1!=2 returns true
Contains	contains	"booker12" contains b returns true
Is null	Empty cell	"Jane Doe" is null returns false
Is not null	Not empty cell	"Jane Doe" is not null returns true

If you have more than one condition you want to define, click Add Condition to add additional conditions.

Replace values

The replace values transformation action replaces values in existing columns based on conditions you define. For example, you may need to replace a special character or abbreviation in an attribute column.

To start, select an existing column from the Select Column field.

After selecting the column, you can define the conditions that determine how the column values are replaced. Each condition starts with a comparison between two columns. If the comparison is true, the data from the Then field is returned; if the comparison is false, the data from the IF NOT THEN field is returned.

The comparison operators you can choose from are:

Comparison Operators	Description	Example
=	is equal to	1=2 returns false
!=	is not equal to	1!=2 returns true
Contains	contains	"booker12" contains b returns true
Is null	Empty cell	"Jane Doe" is null returns false
Is not null	Not empty cell	"Jane Doe" is not null returns true

If you have more than one condition you want to define, click Add Condition to add additional conditions.

Filter

The filter transformation action reduces the number of rows in your data set to only those that match filter criteria.

Filters on a column of type string are case sensitive and support the following comparison operators:

Comparison Operators	Description	Example
=	is equal to	1=2 returns false
!=	is not equal to	1!=2 returns true
Contains	contains	"booker12" contains b returns true
Is null	Empty cell	"Jane Doe" is null returns false
Is not null	Not empty cell	"Jane Doe" is not null returns true

Filters on a column of type date-time, integer, or double additionally support the following comparison operators:

Comparison Operators	Description	Example
<	Less than	1<2 returns true
>	Greater than	1>2 returns false
<=	Less than or equal	1<=2 returns true
>=	Greater than or equal	1>=2 returns false

These operators allow you to filter ranges of values in your data set.

Add data

Additional information from other data sets can enrich your process mining analysis. This might be data from a different system like your CRM system or internal tables from your business unit. With the add data transformation action, you can add supplemental data sets to your transformation project.

To add the add data transformation action to a building block:

1. Click Add and select the Add Data transformation action. A preview of your current transformation displays.
2. Select an existing data set from the Select Table drop-down.
3. Select a key column from the current data set that shares values with a column in the new table.
4. Click Preview to verify the transformation result.
5. Click Save to add the new data to the data set in the building block.

After adding data, you can use any new columns as events or attributes, and you can continue to transform the new combined data set.

Date conversion

Use the date conversion transformation action to standardize dates within your transformations and convert strings into UTC time stamps. In addition to case IDs and events, time stamps are a fundamental component of the data used for process mining.

When you add a date conversion transformation action, you must specify the following:

• The columns that contain the time stamp you want to use in your event log.
• The current datetime format as a format string. Appian automatically suggests the correct format for the most common datetime formats. For example, the MM/dd/yy hh:mm string matches data like this: 11/23/1955 12:00.
• The local time zone that applies to the data set.

You can build date-time format strings with the following characters:

Character	Description	Example
y	year	1996
M	month	Jul or 07
d	day	10
a	half day	PM
h	hour (0-23)	0
m	min	30

Click Preview to verify the transformation result, before clicking Save.

Time stamps and time zones

Mining Prep saves, operates, and previews all date and time information using the Coordinated Universal Time (UTC) time zone. When you perform date conversions, you must specify the format of the time stamp and the local time zone of the data set.

When you preview and save the date conversion, Mining Prep converts the value from your selected time zone to UTC.

For example, let's say your data set contains a column with time stamps that look like this: 2016/01/04 12:09:44.

You would specify the format string as yyyy/MM/dd hh:mm:ss for this data. Assuming the event occurred in McLean, VA, and your IT system uses this local time zone when creating the log, you would select US/Eastern as the respective time zone.

After you save the date conversion, time stamp will now display as 04.01.2016 05:09:44 UTC. This represents 2016/01/04 12:09:44 EST.

Identify data properties

To create a complete event log that process mining can analyze, it must contain the following items:

• Case ID
• Events
• Case Attributes (optional)

It is common to need to transform your data set before you can define these properties.

Case ID

The case ID is the unique identifier of a business case, which usually consists of a combination of letters and numbers. A business case represents a real business transaction in an IT system. A case often consists of multiple events. Each event can have unique time stamps and case attributes.

In process mining, a business case runs through a particular process variant; therefore, it is the image of exactly one process cycle. The case ID identifies each case individually.

To identify the case ID property from a building block:

1. Click the Case ID button in the Identify section.
2. Select the column that contains the case ID in the Case ID drop-down field.
3. Click Save.

Events

The digital representation of when an activity occurred. An instance of an activity. All events that are assigned to a business transaction form a unique case. Similarly, a business process consists of several activities. An event has an associated case ID, time stamp, and other contextual data. The time stamps correspond to the start or end time of the event.

Not all events have start and end time stamps, but you need at least a start time stamp to successfully define an event. Additionally, process mining can only calculate the duration of events if a start and end time stamp exist.

Mining Prep supports two event identification types:

• Single Events: One column contains all time stamps for one specific activity. In this instance, the column header usually indicates the specific logged activity name.
• Multiple Events: Multiple columns contain event names and time stamps for several activities. One column contains the logged activity names, and the other column(s) contain time stamps.

To identify single events:

1. Click the Events button in the Identify section on your building block.
2. Click the Add Event button.
3. Select the Single Event option.
4. Configure the event options:
   • Event Name: Define the name of the event as it should appear in process mining. The name can differ from the original column name.
   • Start or Start & End: Choose whether the time stamps have a start column or both start and end columns.
   • Start: Choose the column that contains the time stamp for the start of the event.
   • End: Optionally, choose the column that contains the time stamp for the end of the event. Only displays if Start & End is selected.
   • Event Attributes: Optionally, choose characteristics that are specific to a certain activity. For example, "amount" or "responsible department".
5. Click Save.

To identify multiple events:

1. Click the Events button in the Identify section on your building block.
2. Click the Add Event button.
3. Select the Multiple Events option.
4. Configure the event options:
   • Name of Event Group: Define the name of the group of events. This is only used in Mining Prep and doesn't display in Process Mining.
   • Event Name Column: Choose the column that contains multiple event names.
   • Start or Start & End: Choose whether the time stamps have a start column or both start and end columns.
   • Start: Choose the column that contains the time stamp for the start of the event.
   • End: Optionally, choose the column that contains the time stamp for the end of the event. Only displays if Start & End is selected.
   • Event Attributes: Optionally, choose characteristics that are specific to a certain activity. For example, "amount" or "responsible department".
5. Click Save.

Case Attributes

Case attributes are an optional property of an event log and describe characteristics of a case. Case attributes help you make observations such as how costly a deviation or variant is in your process. Each case can have one or more attributes that describe it in more detail. For example, customer or vehicle types can be case attributes. Attribute characteristics can vary from case to case.

You can select the following attribute types:

• Numerical: Numeric characteristics like “total payment amount.”
• Impact: Numeric characteristics that are useful when summed together. In the Process Mining module, the Variants and Deviations pages display the summed values of impact attributes beneath the Impact column.
• Categorical: Descriptive characteristics like “responsible department.”

Numerical and categorical attributes that you define in Mining Prep are available as filters in the Process Mining module.

Execute the transformation project

When your transformation project is complete, you are ready to run the transformation and load the event log into Process Mining.

To transform and load your project into Process Mining:

1. Go to the Transformation Projects tab in Mining Prep.
2. Select the checkbox next to your transformation project.

3. Click Transform & Load.

   

4. Select the environment in which to load the event log. The API key is automatically populated for you.
5. Click Ok.

Once you've manually transformed and loaded a transformation project, you can schedule these actions to happen automatically.

Schedule updates

You can define a schedule for your transformation project to load updated data to Process Mining for continuous analytics, monitoring, and notifications.

Mining Prep automatically extracts, transforms, and loads the updated data from your source system to Process Mining on a reoccurring basis.

See Schedule for more information.

Feedback