Free cookie consent management tool by TermsFeed Updating Expressions to Use a!localVariables
Updating Expressions to Use a!localVariables

Overview

The a!localVariables function replaces the load and with functions. It does everything those functions can do plus provides additional refresh behaviors that are not available in those functions.

The page describes how you would use a!localVariables instead of load and with in various scenarios.

All existing expressions that use load() and with() will continue to work exactly as they did before, so there is no need to remove all instances of those functions in your current applications. However, it is recommended to use the a!localVariables() function going forward as it will simplify your interface design and/or improve your interface performance. All three functions work together, so you can update expressions in increments.

Variable with no dependencies

It is very common to create a local variable that doesn't depend on any other variables, whether you're setting a common default value or running a query with no parameters. This case is configured very similarly between a!localVariables and load.

Using load()

When using load, you simply define the value of the local variable and then you can update its value from a component.

1
2
3
4
5
6
7
8
load(
  local!reportedBy: loggedInUser(),
  a!pickerFieldUsers(
    label: "Reported By",
    value: local!reportedBy,
    saveInto: local!reportedBy
  )
)

Using a!localVariables()

The configuration is exactly the same with a!localVariables().

1
2
3
4
5
6
7
8
a!localVariables(
  local!reportedBy: loggedInUser(),
  a!pickerFieldUsers(
    label: "Reported By",
    value: local!reportedBy,
    saveInto: local!reportedBy
  )
)

By default, all local variables created using a!localVariables() can be saved into, and since it has no dependencies on other variables, the value will only change when it's updated from a component.

Variable that should update when its dependencies change

If you have a variable that depends on other variables and you want to keep its value up-to-date as those other variables change, there were two main ways to configure that using the load and with functions. However, using a!localVariables simplifies this design.

Using with()

If you wanted the variable to be automatically updated each time its dependencies changed, you would have used with for the dependent variable.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
load(
  local!startDate: today(),
  with(
    local!endDate: local!startDate + 7,
    {
      a!dateField(
        label: "Start",
        value: local!startDate,
        saveInto: local!startDate
      ),
      a!dateField(
        label: "End",
        value: local!endDate,
        readOnly: true
      )
    }
  )
)

However, using with to create this variable has two main implications:

  1. The user cannot update local!endDate themselves, because with variables cannot be saved into
  2. The definition of local!endDate would be calculated after every user interaction, even if local!startDate was not updated. If the calculation was expensive it would affect performance.

Using load()

Alternatively, you could use load to create this variable so that it isn't updated on every evaluation and so that the user can edit it on their own.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
load(
  local!startDate: today(),
  local!endDate: local!startDate + 7,
  {
    a!dateField(
      label: "Start",
      value: local!startDate,
      saveInto: {
        local!startDate,
        a!save(local!endDate, local!startDate + 7)
      }
    ),
    a!dateField(
      label: "End",
      value: local!endDate,
      saveInto: local!endDate
    )
  }
)

However, using load to create this variable means that it will not automatically be updated, forcing you to duplicate the logic for local!endDate so that it is also updated correctly when the user interacts with the Start field.

Using a!localVariables()

This is handled automatically for you in a!localVariables. Variables are automatically updated when their dependencies change (instead of on every evaluation) and you can save into those variables.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
a!localVariables(
  local!startDate: today(),
  local!endDate: local!startDate + 7,
  {
    a!dateField(
      label: "Start",
      value: local!startDate,
      saveInto: local!startDate
    ),
    a!dateField(
      label: "End",
      value: local!endDate,
      saveInto: local!endDate
    )
  }
)

Variable that should not update when its dependencies change

You may have a variable that depends on other variables, but you don't want them to stay in sync. This might happen when you need to make a copy of a variable for later comparison. While this was the default behavior for load, you will need to disable the default behavior of a!localVariables using a!refreshVariable to achieve this.

Using load()

Creating a copy of a variable was very simple to create using load since its initial value is never recalculated.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
load(
  local!original: ri!text,
  {
    a!textField(
      label: "Text",
      value: ri!text,
      saveInto: ri!text
    ),
    a!textField(
      readOnly: true,
      value: if(
        ri!text = local!original,
        "Value has not changed",
        "Value changed from [" & local!original & "] to [" & ri!text & "]"
      )
    )
  }
)

Using a!localVariables()

Because variables created using a!localVariables update automatically when their dependencies change, you'll need to disable the default behavior using a!refreshVariable when you want to make a copy.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
a!localVariables(
  local!original: a!refreshVariable(
    value: ri!text,
    refreshOnReferencedVarChange: false
  ),
  {
    a!textField(
      label: "Text",
      value: ri!text,
      saveInto: ri!text
    ),
    a!textField(
      readOnly: true,
      value: if(
        ri!text = local!original,
        "Value has not changed",
        "Value changed from [" & local!original & "] to [" & ri!text & "]"
      )
    )
  }
)

Variable that contains a save or smart service

If you want to reuse logic that will be reused within a saveInto parameter of a component that uses either a!save or a smart service, you previously had to use the with function. When using a!localVariables you'll need to use the a!refreshVariable function to achieve this.

Using with()

Storing a save or smart service call had to be created using the with function so that it could reevaluate correctly when the user interacted with the component where the variable was used.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
load(
  local!firstName,
  local!lastName,
  local!updatedOn,
  with(
    local!updatedOnSave: a!save(local!updatedOn, now()),
    {
      a!textField(
        label: "First Name",
        value: local!firstName,
        saveInto: {
          local!firstName,
          local!updatedOnSave
        }
      ),
      a!textField(
        label: "Last Name",
        value: local!lastName,
        saveInto: {
          local!lastName,
          local!updatedOnSave
        }
      ),
      a!textField(
        label: "Updated On",
        value: local!updatedOn,
        readOnly: true
      )
    }
  )
)

Using a!localVariables()

In order to ensure that the save or smart service gets appropriately evaluated when the user interacts with the component, you need to make the variable refresh on every evaluation using a!refreshVariable.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
a!localVariables(
  local!firstName,
  local!lastName,
  local!updatedOn,
  local!updatedOnSave: a!refreshVariable(
    value: a!save(local!updatedOn, now()),
    refreshAlways: true
  ),
  {
    a!textField(
      label: "First Name",
      value: local!firstName,
      saveInto: {
        local!firstName,
        local!updatedOnSave
      }
    ),
    a!textField(
      label: "Last Name",
      value: local!lastName,
      saveInto: {
        local!lastName,
        local!updatedOnSave
      }
    ),
    a!textField(
      label: "Updated On",
      value: local!updatedOn,
      readOnly: true
    )
  }
)
Open in Github Built: Fri, Mar 22, 2024 (05:03:50 PM)

Updating Expressions to Use a!localVariables

FEEDBACK