This page applies to self-managed installations only. Appian Cloud customers do not need to follow these instructions when upgrading to newer versions of Appian.
This guide assumes you are on Appian version 20.2 or higher. If you are on a lower version of Appian, upgrade to 20.2 first before upgrading to the current release.
To view your current Appian version, log into your Appian environment as a designer or system administrator and click the navigation menu > About Appian.
In this document, the following conventions are used to indicate the locations you have selected on your servers during installation:
Appian requires K4 version 4.0. Before upgrading to the latest Appian version, you will need to ensure that you have a valid K4 license installed on your Windows or Linux system.
To find your current K4 license details:
<OLD_APPIAN_HOME>/logs/data-server/k4_license.info. For example:
1 2 3 4 5 6 7 $ cat $APPIAN_PATH/logs/data-server/k4_license.info #System auto-generated log on 2021-08-20T09:24:11Z VERSION=4.0 RELEASE_DATE=2021-02-02 EXPIRY_DATE=2022-06-01 UPDATE_DATE=2022-06-01 BANNER_TEXT=example.com #123456
If either of these two dates is after your planned Appian upgrade date, or if the
k4_license.info file is not present on your installation, please open a support case for assistance obtaining a valid K4 version 4.0 license before continuing with the Appian upgrade process.
If you are using Oracle JDK 8, it must be on update 291 or later. If you're using the bundled OpenJDK 8, no action is required.
By default, Transport Layer Security (TLS) 1.2 is required for all connected external sources. If you need to connect to systems using TLS 1.0 or 1.1, follow the steps in the Post-Install Configuration page to enable TLS 1.0 and above.
Appian components communicate with each other over specified network ports. If you are preparing a distributed installation, you must first ensure that the required ports are open between the servers that host the different Appian components.
In Appian 20.4 and later, port 9200 needs to be open for the search server. This port must be accessible from the application server. No changes are required to the search server section of the Appian topology file during Appian upgrade to 20.4, as long as the port 9200 is open. Please refer to the search server configuration page for more details.
Always check the release notes for defect fixes, Java API deprecations and removals, and other changes that may affect plug-ins used by your installation.
Some plug-ins may need to be updated as part of the upgrade in order to continue to provide the desired functionality.
If your application contains custom Application Portal and non-SAIL forms, See the How to upgrade legacy customizations knowledge base article for instructions.
The following is applicable if you are upgrading from 20.3 or earlier on Linux operating system:
Appian 20.4 and later uses standalone deployment of Elasticsearch for the search server. This provides increased security and reliability for the search server. Elasticsearch uses a
mmapfs directory by default to store its indices. The default operating system limits on mmap counts could be low and result in out of memory exceptions.
On Linux, increase the limits by running the following command as root:
sysctl -w vm.max_map_count=262144
Minimum value of 262144 is required. To set this value permanently, update the
vm.max_map_count setting in
/etc/sysctl.conf. To verify after rebooting, run
The following is applicable if you are upgrading to 21.4 or later on Windows operating system:
Download and install the Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package MFC Security Update. This update securely installs libraries that are required on your windows system to run Appian 21.4 or later.
Halt any scheduling for the following scripts to prevent system changes while upgrading or unnecessary jobs from continuing.
For all versions 20.3 and later, all engines in a highly-available configuration will restart automatically during checkpointing (given it is safe to restart). If you have previously scheduled the engineRestart script to run periodically it should also be disabled. You will not need to re-enable the script in the steps below.
Refer to Starting and Stopping Appian for the version of Appian that you are upgrading from for instructions on how to shut down Appian.
If you are installing the new version of Appian on the same server as your current Appian instance, first rename your current Appian installation directory to keep from losing the existing data (you will need to copy this data over after installing the new version in the next step). For example, you might change the current directory name of
OLD_APPIAN_HOME. This will allow you to install the new version into
Refer to the Appian Installation Guides specific to your environment and new version. Follow the steps in Part 1 of the guide to install the new version of Appian and then configure the installation as detailed in Part 2. You should not start Appian until you have completed all instructions prior to step 9 in this document.
Keep the following in mind:
conf.suite.BASE_PATHproperty in custom.properties file located in the
<APPIAN_HOME>/conf/directory using forward slashes on both UNIX and Windows.
<APPIAN_HOME>/conf/. The contents of this file should match across all servers in the environment.
Copy the following files and folders from the old Appian directory into the same location in your new Appian installation. Some of these directories might not exist in the legacy Appian directory, depending on what version it is.
If you copied your data files for the
_admin/mini/ directory into a directory that uses a different file path than before, such as
//NewRootFolder/_admin/mini/ instead of
//OldRootFolder/_admin/mini/, you must run the
change-paths.sh (.bat) file located in
<APPIAN_HOME>/_admin/_scripts/tools/ to update the mini website content directory location.
Note that copying the corresponding files from the old Appian installation into
<APPIAN_HOME>/services/data/kafka-logs/ in the new installation is mandatory since this directory contains essential data required for proper start up. The target directory must be empty before copying the data from the previous installation.
Double check each directory to ensure that your old files were successfully copied over.
The system may still start successfully with improperly copied or missing resources. However, resulting system errors may still occur later when a process action that relies on a missing resource is attempted.
Copy the custom.properties file located at
<OLD_APPIAN_HOME>/conf/ to the
1 2 conf.content.download.byId=true conf.tasks.accessibleById=true
These properties are new in 20.3 with the introduction of opaque URLs for tasks and documents. The configurations above provide backwards compatibility for some applications developed in 20.2 or earlier that constructed custom links using a numeric ID. After upgrade, developers can follow the opaque URL guidance to modify their applications to support opaque URLs in custom links. Once applications have been updated to use only opaque URLs, these configurations can be removed from custom.properties.
For any other custom configuration files, such as
appian-topology.xml, merge your customizations with the new default example or template files and place the resulting file in the new installation's directory.
Customers upgrading to version 20.3 or later should update the
appian-topology.xml file to configure the data server to run with two real-time store components. In previous releases, it was recommended to run the data server with just one real-time store component. Though this configuration is still technically supported, it is now recommended to run the data server with two real-time store components in order to load-balance queries to the data server. Currently, it is not supported to run more than two real-time store components. When changing the topology, make sure that the required ports have been opened as well.
Copy over the Data Server security token from
<OLD_APPIAN_HOME> to the corresponding directories in
For more information about the security token, including regeneration, please refer to Data Server Connection Restrictions.
The following is applicable if you are upgrading from 20.3 or earlier:
In 20.3 or earlier versions of Appian,
start.conf file in
<APPIAN_HOME>/search-server/bin directory was used to modify the defaults for minimum and maximum heap memory usage by the search server. If you have created a
start.conf file for your Appian installment in the past and modified the default memory values for the search server, you need to ensure that the corresponding values are set using
custom.options file in Appian 20.4 and later. Please refer to starting search server page for more details.
The following is applicable if you are upgrading from 20.4 or earlier:
If you use the configure script to register and install the new version of Appian and you copy the configurations from the older Appian version into the repository for the new Appian version, you might have a mismatch between
conf.data.search-server.restclient.apiKey value in
REPO/conf/custom.properties.ENV file and
conf.search-server.http.auth.apiKey value in
REPO/conf/search-server/custom.properties.ENV file. This mismatch will cause configure script validation to fail. This occurs because
conf.data.search-server.restclient.apiKey does not exist in Appian version 20.4 and older. To avoid issues, before you validate or deploy the configurations in the new repository, copy the value of
conf.data.search-server.restclient.apiKey value in
REPO/conf/custom.properties.ENV. This will ensure that the
conf.data.search-server.restclient.apiKey values are the same, which is a requirement for the search server to start.
The Appian data source must reuse the same database before and after upgrading in order to preserve the existing data. The schema of that data source will be automatically updated to the latest version during application server startup.
Elevated user rights (such as Schema Owner or Database Owner) are required for the Appian Data Source during the application server startup portion of the upgrade process. These elevated rights may be removed after upgrading, if desired.
See also: Configuring Relational Databases
Support for custom Spring Security configurations has been deprecated since version 7.11 and you should convert your authentication configuration to one of the three out-of-the-box authentication mechanisms at the earliest opportunity.
If you have not yet converted to using the out-of-the-box authentication configurations and you maintain customized or overridden Spring Security .xml files, you must merge them with the associated base files in the
<APPIAN_HOME>/deployment/web.war/WEB-INF/conf/security/ directory when upgrading to the latest version of Appian.
If you have multiple application servers, start one application server and wait for it to complete startup before starting the rest. The remaining application servers may be started simultaneously.
It is possible to successfully upgrade Appian, but see a blank page or older login screen while testing the initial login. If this occurs, clear you browser cache, and try navigating to the
Reschedule the administrative script(s) you disabled in the first step.
Make sure to update the script location to the new instance.
If you used customized email templates in the prior version, reapply these changes to the new templates used in your new version of Appian.
On This Page