This page explains the concepts and methods for distributing an Appian installation.
There are three principle reasons to run a distributed installation of Appian:
High-availability and load balancing are not available for Windows environments because running more than one instance of the Appian engines and the Internal Messaging Service (Kafka and Zookeeper) is not a supported configuration in Windows environments.
In order to have a highly-available installation of Appian, it needs to be robust to potential hardware failures. This is only possible if every service that comprises Appian has more than one instance, running on different servers, such that the unexpected loss of one server does not take out all instances of any service. Servers in a high-availability installation may be spread across separate data centers as long as there is low (less than 10ms) network latency between the data centers.
Related documentation for high availability with Appian:
|High Availability for Appian Cloud||Information about the high-availability offering for Cloud customers.|
|How to Setup a Highly Available system||Instructions that illustrate a recommended, high-availability configuration for on-premises Appian systems.|
|Setting Up for Disaster Recovery||Information that may help planning a high-availability topology.|
High-load sites may have more demand for a service than a single instance of it can provide. In this situation, adding additional instances of one, or many, services can increase the capacity of the installation.
Some customers have requirements to only run one instance of each service, but want them to run on separate servers for capacity (a single server is not large enough to host all services) or security (a desire to host data-persistence services in a different network zone, for example) reasons.
This section explains how to configure a distributed installation of Appian.
The first step in setting up a multiple server configuration is mapping out which servers will run the various architectural components of the Appian software. The distribution of the architectural components across one or more servers on a network is referred to by the documentation and the product as the "topology."
The following components of Appian can be configured to run on the same physical machine or on separate machines:
Similarly, each component can be clustered independently. For example, an environment may choose to have two instances of application servers and three instances of the search server deployed.
When planning topology for a high-availability installation, ensure it meets the following criteria:
|All Servers are Linux Environments|
|Exactly Three (3) Instances of Search Server, Data Server, and the Internal Messaging Service|
|At Least Two (2) Instances of the Application Server and Appian Engines|
|No More Than One (1) Instance of Any Appian Engine Or Data Server on a Single Server|
|Multiple Instances of the Internal Messaging Service Only If There Are Multiple Instances of All Appian Engines|
Clustering the Appian engines, Kafka, or Zookeeper is only supported on Linux environments, not on Windows environments.
Due to the way file names and file paths are calculated for documents stored in Appian, the application server and engine servers must be on servers using the same type of operating system. Do not mix Windows and Linux.
No more or less than three (3) instances of the search server, data server, and the Internal Messaging Service (Kafka and Zookeeper) components in total. Components that require establishing consensus between the different instances (search server, data server, Kafka, and Zookeeper) require three instances in order to have a system that is robust to a failure of one of the instances. Appian does not support more than three of each of these components. And no more than three instances can be configured.
Components that do not establish consensus (the application server and the Appian engines) require at least two instances in order to be robust to a failure of one instance. While only two instances are required, Appian recommends that high-availability installations have at least three instances of each of these services.
Only one instance of any given Appian engine may run on a given server. Similarly, only one instance of data server can run on a given server. Appian engine and data server can run on the same server.
Configuring multiple instances of the Internal Messaging Service (Kafka and Zookeeper) can provide additional resiliency for those services in the event of a hardware or network failure, but the additional resiliency for the system as a whole will only be achieved if there are also multiple copies of all of the Appian engines. If there is only one instance of a certain type of engine, the risk from adding additional components to the system (and therefore adding additional opportunities for failure) outweighs the benefit from adding resiliency to the Kafka and Zookeeper layers. Appian recommends only running multiple instances of the Internal Messaging Service if you also have multiple instances of all Appian engines.
Distributed installations require static IP addresses for each server. You must have a static IP address assigned to each machine prior to configuring your distributed installation. If you have not done so already, assign static IP addresses to each machine you plan to use to host Appian.
You must also verify that each machine can communicate with the others in the network over the ports that Appian uses. As a security best practice, it is recommended to configure firewall settings so that each port is only open to the machines that need access. For example, Kafka uses port 9092 and the other Services that need to communicate with Kafka are Engines, Data Server, and other Kafka instances. So port 9092 should only be open to machines that are hosting an instance of Engines, Data Server, or Kafka. For a non-distributed installation where all Appian services is hosted on one server, then only the local host should have access to the ports.
Install a full version of Appian on machines that you wish to host any Appian component. Regardless of whether the machine is intended to run just Appian Engines, just the main Java application, just a Search Server node, or some combination thereof, the full installation should exist on each server in the environment in order to eliminate the possibility of misconfiguration due to missing components. An Appian installation is not required on the machine running the RDBMS.
Each installation of Appian must be of the same version with the same hotfixes.
Configuration File Consistency
When running across multiple servers, it is especially important to make sure that they are configured the same. All configuration files, such as appian-topology.xml, custom.properties, and others, must be the same on all servers.
The way to specify which components of Appian run on which hosts is with the appian-topology.xml file, located in
<APPIAN_HOME>/conf/. Example configurations can be found in appian-topology.xml.example, which is located in the same directory.
When specifying hostnames in the appian-topology.xml file for a distributed installation, you must not use "localhost" as that will resolve differently on the different machines in the cluster. Hostnames specified in appian-topology.xml must exactly match the
host value that is marked with
_h in the output from _admin/_scripts/licinfo.sh (.bat).
An appian-topology.xml file that is empty, contains only XML comments, or contains invalid XML will result in the engines using the default topology.
As part of a distributed installation, it is a requirement to copy the appian.sec file across all machines in the distributed environment, for it is necessary to enable authorized connections between the engines and specified application servers. It is located in
Refer to Appian Engine Connection Restrictions for more information.
As part of a distributed installation, it is a requirement to copy the service_manager.conf file located in
/services/conf/ across all machines in the distributed environment, for it is necessary to enable authorized connections to the service manager and the engines across machines.
The service_manager.conf file is created when running the password script.
When moving to a high-availability configuration you should also remove any custom configurations for checkpoint scheduling. High-availability installations should use the default values for these configurations as engines do not become unavailable when checkpointing when there is more than one set of engines.
The following directories must be shared across all servers that run that component. All servers that run the given component need both read and write access to these directories.
|Component Name||Folder Name|
|Content and Collaboration Statistics Engines||
|Notifications and Notifications Email Engines||
|Process Analytics 00 Engine||
|Process Analytics 01 Engine||
|Process Analytics 02 Engine||
|Process Design Engine||
|Process Execution 00 Engine||
|Process Execution 01 Engine||
|Process Execution 02 Engine||
If you have more than the default three shards of Process Execution and Process Analytics, the gw1 directories for those shards must be shared across servers as well.
The recommended approach for sharing directories between servers is:
Both Kafka and Zookeeper are sensitive to latency with regard to CPU, memory, and disk contention. For high-load sites and any site that has multiple Kafka or Zookeeper instances, Appian recommends having enough CPUs on the machines that host these services such that they each have at least one CPU reserved for their use. For example, if you have the default 15 engines, Kafka, Zookeeper, and service manager all on a single server all fully in use, that server should have at least 18 CPUs. This is because each of the 15 engines may take up to 1 CPU for itself, which leaves 3 CPUs split between Kafka, Zookeeper, and Service Manager. As not all types of system load will result in all engines being fully utilised at the same time, it is possible to have fewer CPUs than the total number of engines as long as the server has enough total CPU capacity to handle the peak loads. Appian also recommends keeping the data directories for these two components (
services/data/zookeeper) on local disks rather than mounting them onto network drives. This recommendation is consistent with industry best practices for these services.
In addition to the above directories, which must be shared across servers to have a functioning system, many administrators choose to share application logs between servers for ease of access by linking the /logs directory on the local machine to /shared-logs/<local machine name> directory on a network attached storage server and adding a link from APPIAN_HOME/shared-logs to the shared-logs directory on the network storage device.
Appian Health Check's data collection step will look for a directory named "shared-logs" directly inside the
APPIAN_HOME directory and will collect logs inside any subdirectories found there.
1 2 3 APPIAN_HOME/shared-logs/<machine A> APPIAN_HOME/shared-logs/<machine B> APPIAN_HOME/shared-logs/<machine C>
With this shared logging configured, the data collection step of Health Check only needs to be run on a single server rather than run once on each server.
Follow the steps for Load Balancing Multiple Application Servers to route traffic from your web servers across multiple application servers.
When deploying Appian via the configure script, ensure that the names you use in the
Configure Tomcat clustering by specifying a node name step match the node names specified in the web server's config file.
The procedure for starting a distributed installation of Appian is not different than when starting a non-distributed installation of Appian except that you must start all instances of a given component, across all servers, before moving onto the next component. First make sure the RDBMS is running, then start all of the engines, then start all instances of the data server, then the search server, and then start the application servers.
If the Appian engines are running on different servers than Kafka & Zookeeper, either can be started first. The engines will wait for Kafka & Zookeeper before they become available.
The procedure for stopping a distributed installation of Appian is not different than when stopping a non-distributed installation of Appian except that you must stop all instances of a given component, across all servers, before moving onto the next component. First shut down all application servers, then shut down all instances of the search server, then shut down all the instances of the data server, and then shut down all of the engines (using the
--cluster option of the stop script.
On This Page